Effective foundation protection
The foundation is the supporting part of a building, which is used to redistribute the load from the supporting structure of the building to the ground of its foundation. The…

Continue reading →

What cable to choose for laying electrical wiring
The choice of cable for wiring - is a fundamental factor in the repair or replacement of wiring space. The main task of the cable is sewage and power distribution…

Continue reading →

Surface preparation for plastering
Plaster is the main method of leveling surfaces and preparing them for further finishing. But the plastering process also requires a preparatory stage. The main quality of the plaster -…

Continue reading →

Warm water floors

With the onset of winter, everyone thinks about how to keep the heat in the house, because the help of central heating, in severe frosts, can not be expected. A good option for heating is called the “warm floor” system, which allows you to heat a room without cluttering it with heating radiators.

Having established a warm water floor in your apartment, you will not freeze, even if you walk barefoot. Heated floor will make your home warm and comfortable. Firms engaged in the manufacture of such a system, guarantee its reliability and quality.

When using the same heat sources, floor water heating has a significant difference from radiator heating – the method of heat distribution.
Warm water floors are designed for rooms with a small area. It can be country houses or apartments, where the room has an area of ​​12m2, there is a bathroom and a kitchen.
They consist of:

pipes through which water circulates;
combined collector;
special brackets that fix the turns of pipes from the collector to the floor;
additional pipe fastening elements.
The water that circulates through the pipes heats the area of ​​the room evenly. Floors warm able to respond to any climate change. Operation of such a floor depends on the tube, which is responsible for the permeability of the coolant. If the capacity of the tube meets the standards, then such a floor will delight you for about fifty years.

Before you install the floor, you need to be sure that in the near future there will be no repair of walls and floors. Also, doors and windows should be installed in the right room. The floor should be perfectly flat and equal in height along the entire perimeter.

No matter how easy installation of a warm water floor may seem, installing it yourself is not recommended. There are many different nuances that are known only to specialists.

The main advantages of warm water floors are:

they are economical;
evenly distribute heat throughout the room;
you can use any flooring, even parquet;
they are hygienic – there is less dust in the air, which means that the number of bacteria is much less;
furniture can be set arbitrarily, where you need it;
heat transfer does not cause dust to rise to the air;
they maintain optimum humidity in the room.

Building a cottage with your own hands
The construction of the cottage with their own hands In modern society, there are always such workaholics who strive to do everything with their own hands. They never need help,…

...

Veneering: advantages and disadvantages
At present, wooden materials must meet all international requirements: environmental friendliness, stability, practicality, a long period of operation, safety and so on. No less important is such a moment as…

...

How and what to put liquid wallpaper on the wall
High-quality repair is good, but expensive. You can cheap, it means and not very high quality! And how to make not very expensive and with good quality? There are many…

...

Which house is better: brick or wooden?
Recently, low-rise construction is gaining momentum and with honor takes its segment in the overall growth of rented square meters of housing. However, the percentage of wooden housing construction is…

...